Comment assembler une cuisine d'angle IKEA. Voyagez chez IKEA - construire une cuisine en utilisant une nouvelle méthode
Je vais vous parler un peu de la façon dont nous assemblons et installons les cuisines, dans ce cas en utilisant l'exemple d'une cuisine IKEA.
La pièce était déjà préparée pour l’installation, je vous expliquerai comment procéder dans le prochain post.
La première chose que nous faisons toujours lors du montage d'une cuisine est de procéder à un audit complet de l'intégralité de la cuisine, de vérifier que tous les ferrures, pieds, plinthes et plinthes sont disponibles, que les armoires et façades en stock correspondent au plan et , bien sûr, la plomberie et la hotte - nous faisons cela pour que s'il manque quelque chose, le client puisse y aller le matin et acheter ce qui manque.
Deuxième étape - déballage
Ikea aime emballer correctement ses produits et les cuisines ne font pas exception. Afin de ne pas s'enliser dans une mer de carton, nous déballons le plus possible les composants en ne laissant que les façades dans l'emballage ; nous les déballerons immédiatement avant l'installation.
Troisième étape - assemblage des armoires
Nous récupérons les armoires déballées. Lors de l'assemblage, il est très important d'utiliser un tournevis avec contrôle de couple, sinon la vis autotaraudeuse cassera les filetages du panneau de particules et la connexion ne sera pas solide.
Il est strictement interdit d'utiliser une perceuse lors de l'assemblage - la perceuse casse les filetages et dans quelques années, les armoires se desserreront.
Lors du déballage, il est important de ne rien endommager ; nous y faisons très attention et le faisons avec le plus grand soin.
Ikea comprend également des armoires inférieures avec des coins à accrocher au mur. Ils peuvent être utilisés aussi bien avec une bande qu'avec une rondelle spéciale incluse dans le kit, fixée avec des vis autotaraudeuses.
Dans notre travail, nous utilisons un tournevis Metabo, qui a fait ses preuves
Nous disposons les armoires dans l'ordre dans lequel elles sont situées selon le plan de la cuisine.
Les parois arrière s'insèrent dans une rainure spécialement préparée et sont fixées avec des clous.
Nous marquons puis découpons un trou pour les communications ; pour cela, nous utilisons une scie sauteuse et une perceuse d'un diamètre de 10 mm.
Nous nivelons la partie avant des armoires, les resserrons une à une avec des pinces et les fixons avec des attaches pour meubles. Si cela n’est pas fait, la partie avant de la cuisine sera toute tordue en peu de temps.
Plus la façade des armoires est lisse, plus il sera facile d’ajuster les façades.
Il faut traiter toutes les coupures avec un scellant transparent hydrofuge.
Nous vérifions le niveau de chaque armoire dans tous les plans.
Nous marquons la scie sous l'évier le long du bord de l'évier lui-même, puis reculons de 1 cm et faisons une marque de finition le long de laquelle nous faisons la scie.
Voici à quoi ressemble le balisage. Nous le faisons de manière à ce qu'aucune trace ne soit visible lors de l'installation ultérieure de l'évier.
Nous traitons également la coupure sous l'évier avec du mastic ; nous plaçons les éviers en grès cérame sur le même mastic et le laissons reposer plusieurs heures sans le déplacer pour qu'il « durcisse »
La particularité de cette cuisine réside dans les armoires coulissantes, qui sont partout ; il n'y a pas une seule façade battante. Des tiroirs courts sont utilisés sous l'évier. Le siphon a en outre été acheté à plat afin de minimiser le nombre de déblais.
Tous les raccordements de plomberie sont réalisés à l'aide d'appareils sanitaires ; avec une installation de haute qualité, il n'y a aucune plainte à ce sujet.
Une petite astuce : une enveloppe en papier collée au mur vous permet de garder le dessus de table propre.
Inserts dans les poignées intégrées à la façade en quatre couleurs.
Nous assemblons les cartons et les ajustons. Les cuisines METHOD utilisent des ferrures de haute qualité de BLUM, de sorte que les façades peuvent être parfaitement ajustées avec une certaine habileté.
Nous installons et connectons la plaque de cuisson, le four et le four micro-ondes encastrable.
Nous montons le mitigeur sur l'évier avant de l'installer sur le plan de travail.
Traitez la coupure sous la plaque de cuisson avec un mastic transparent.
Quelle est votre impression des meubles Ikea ? Je répondrai à cette question non pas du côté du client, mais du côté de l'installateur, puisque seul le consommateur peut donner une évaluation des caractéristiques opérationnelles.
Le plaisir de monter une cuisine Ikea
Il est clair que monter une cuisine Ikea est un plaisir. Même un non-professionnel peut effectuer ce travail. Tout ce que vous avez à faire est de prendre un marteau et un tournevis, et des instructions détaillées seront incluses avec chaque produit. La seule question est de savoir combien de temps il faudra pour assembler une cuisine Ikea et comment tout se passera bien. Je voudrais vous parler d'un cas tiré de la pratique. Le client a commandé l'assemblage de quatre armoires à deux vantaux chez Ikea. Au cours de notre travail, deux filles ont également voulu assembler un petit meuble de 40 cm, décidant qu'elles pourraient le manipuler facilement et rapidement. Alors que nous avions tout fait et que nous étions sur le point de partir, ils n’avaient pas encore fini. Cela confirme que chacun doit faire sa part. Le montage des meubles doit donc être réalisé par des professionnels et non par des amateurs.
Besoin de savoir sur ce meuble
Pour ceux qui ont besoin d'assembler une cuisine Ikea, il faut savoir que les meubles de cette entreprise sont d'excellente qualité, les matériaux et les ferrures utilisés, qui correspondent exactement aux pièces en panneaux de particules stratifiés percées à cet effet. Les avantages incluent la combinaison d'éléments de cuisine avec des appareils électroménagers intégrés de cette société. Il s’adapte parfaitement, est facile à installer, se fixe bien et dure généralement longtemps. Les appareils Ikea sous son logo sont produits par Whirpool.
La qualité n'est malheureusement pas présente chez toutes les marques connues. Dans les cuisines Leroy Merlin, Castorama, K-Rauta vendues dans les grandes surfaces de construction, le perçage peut ne pas coïncider avec les paramètres requis. Ainsi, les trous pour les attaches sont sous-percés et les trous pour les chevilles sont sur-percés. Bien évidemment, ces erreurs compliquent le travail de l’assembleur. Dans de tels cas, les artisans doivent apporter des modifications pour que le meuble soit installé correctement.
Un peu sur l'assemblage d'une cuisine Leroy Merlin
Je voudrais citer Leroy Merlin : « À Dieu ne plaise que vous commandiez le montage d'une cuisine Leroy Merlin dans le magasin même lors de l'achat d'une cuisine. » Aussi, il est conseillé de ne pas tomber dans le piège qui promet un montage gratuit de la cuisine. Il faut dire qu'il n'y a pas d'assembleurs qualifiés dans le magasin Leroy. On vous proposera les services de non-professionnels, peut-être même de vos amis qui ont besoin de travaux de hacking. Nos spécialistes ont dû faire face aux résultats d'un tel travail. Malheureusement, nous ne pouvons pas laisser de critiques positives à son sujet. Il devrait y avoir une conversation séparée sur les meubles produits par l'usine Borovichi Furniture, même si, pour être honnête, je ne veux pas particulièrement en parler. On ne sait tout simplement pas dans quelles conditions les ouvriers de l’usine le produisent. La seule façon de justifier cela est que les meubles de Borovichi ont un faible coût.
Avis d'un assembleur professionnel
Probablement, en tant qu'assembleur professionnel, je rencontre ce qui me semble être des défauts évidents, mais le consommateur ordinaire ne les remarque pas du tout ou les considère comme très insignifiants. Ou bien, en option, les clients eux-mêmes ont sous-estimé les exigences en matière de qualité de la cuisine, car pour ce genre d’argent, ils n’attendent rien d’autre. Certains seraient d’accord avec cela, mais je pense que la qualité de Borovichi est à un niveau très bas.
Voici un exemple que Borovichi a dû rencontrer lors du dernier assemblage de meubles. Le côté de la trousse de cuisine (la même partie) est montré depuis les bords opposés. S’ils sont fabriqués correctement, ils devraient être identiques, mais nous ne le voyons pas. Si vous faites attention, la distance entre le bord de la pièce et le centre du trou pour l'attache doit être de 8 mm, mais dans ce cas elle est de 13 mm et 3 mm. Il ne sera pas difficile d'imaginer comment les pièces s'assembleront. Considérons d'autres cas avec des éléments de mobilier achetés dans l'un des supermarchés. Sur deux d’entre eux nous verrons un bord à moitié collé. Mais ce n’est pas le pire défaut du produit, puisque ces extrémités non traitées ne seront pas visibles par la suite. Sur les photographies suivantes, vous pouvez voir le résultat obtenu lorsque les pièces des chevilles ont été mal percées. Veuillez noter que seul le côté droit du meuble est percé correctement. Le bord de la pièce en aggloméré est mal collé.
Inconvénients de l'assemblage d'une cuisine Ikea
Que peut-on attribuer aux inconvénients de l’assemblage des meubles de cuisine Ikea ?
Premièrement, il s’agit d’un design assez simple et minimaliste. Bien que l'on parle beaucoup de leur grande équipe de designers développant des modèles nouveaux et originaux, mais pour une raison quelconque, je ne les ai pas rencontrés.
Deuxièmement, je voudrais dire quelque chose sur l'assemblage des casques.
Les inconvénients incluent le fait que l'assortiment de ce fabricant ne comprend que des modules standards (30,40,60,80, etc.), ce qui est très différent d'une cuisine pouvant être réalisée sur commande. Par exemple, si vous possédez un lave-vaisselle d'une largeur de 45 cm, alors vous ne sélectionnerez qu'une façade de 50 cm, puisqu'ils ne prévoient pas 45 cm. Plus précisément, ils sont en vente, mais uniquement en métal. Cette option peut grandement déformer le style général de la cuisine. Vous avez donc rendu toutes les façades rouges, et en raison de la taille requise, vous en avez pris une et l'avez installée en métal. Est-ce que ça aura l'air sympa ? Une question très controversée.
Cette solution, au fond de la cuisine, un lave-vaisselle encastrable de 45 cm de large est situé dans un meuble à façade métallique, tandis que d'autres ont un ton marron. Le client doit donc se creuser la tête pour savoir comment placer au mieux les modules afin que toutes les « non-normes » d'une petite cuisine russe avec des conduits de ventilation ou des conduites d'eau dépassant du mur soient prises en compte.
À mon avis, le manque de panneaux muraux normaux peut également être considéré comme un inconvénient dans la gamme d'assemblage Ikea. Souvent, lorsque les collectionneurs viennent chez le client, ils ne les trouvent pas du tout, ou alors ils les voient achetés chez Leroy Merlin ou Castorama. Il s’avère qu’Ikea ne les vend pas de la qualité que nous aimerions voir. Ce sont de petites pièces de 60x50, en plastique très fin et peu pratiques à installer. Encore une nuance. Dans ma pratique, je n'ai jamais vu de bandes d'extrémité pour comptoirs de cette entreprise. Ainsi, si vous devez le démonter pour installer une cuisinière électrique, les extrémités ne peuvent être formées qu'à l'aide de bandes de connexion. L'ourlet Ikea réalisé à cet effet est également incompréhensible. Il est beaucoup plus fin que nécessaire et n'est pas non plus autocollant. Par exemple, nous prendrons un beau comptoir Ikea et le couperons avec une scie sauteuse à la longueur dont nous avons besoin. Si vous faites attention, il est recouvert d'un chant ABS sur le pourtour dont l'épaisseur est de 2 mm. Pour coller la face sciée, on nous propose un chant de 0,4 mm d'épaisseur. Ne vous semblerait-il pas étrange qu'une extrémité soit différente de l'autre ?
Avant d'assembler la cuisine Ikea
De plus, avant d'assembler la cuisine Ikea, il faut prendre en compte la nécessité de la fixer « étroitement » aux murs. Ainsi, après avoir assemblé et installé le meuble, vous n'aurez même plus la possibilité de le déplacer légèrement. Pour le sécuriser, vous devez soit le scier sous la plinthe, soit vice versa. Étant donné que la distance requise pour les services publics n'est pas prévue entre le mur et le module inférieur installé, l'installateur doit effectuer des découpes pour les tuyaux et les prises. Et avec cette option de montage, il doit y avoir des murs et des coins lisses, ce qui est rare dans notre pays.
Conclusions
Malgré tout l’attrait des meubles de cuisine Ikea, mieux vaut confier le montage d’une cuisine Ikea à des professionnels, car ce sont eux qui savent exactement comment le faire. Nos spécialistes vous aideront à assembler une cuisine Ikea à Moscou, appelez +7 499 340 32 21
Les ensembles de cuisine Ikea sont présents depuis longtemps sur les marchés européens du meuble. Ce sont des éléments d’intérieur abordables et spacieux pour n’importe quel espace de cuisine. Par conséquent, ils sont très demandés et reçoivent de bonnes critiques. Et récemment, le fabricant a lancé un nouveau produit d'Ikea appelé « Method ». La façade des meubles, des tiroirs et des charnières a été mise à jour. Des étagères spacieuses pour les accessoires pour enfants sont apparues.
Comment assembler et installer un ensemble de cuisine Ikea de vos propres mains ? Ce n'est pas difficile si vous disposez des outils nécessaires et au moins un peu d'expérience. L'aide de quelqu'un ne ferait pas de mal non plus. L’installation et l’accrochage ne sont donc pas une tâche facile. Et l’alignement des objets nécessite des vues extérieures.
Les meubles IKEA sont livrés démontés en éléments individuels. Cela fait peur à beaucoup de gens. Vous pouvez bien sûr inviter un spécialiste du montage, mais cela coûte de l'argent. Avant de commencer un travail indépendant, il est recommandé de regarder attentivement la vidéo, qui montre l'ensemble du processus étape par étape. De plus, vous devez lire les instructions ci-jointes de l'éleveur. Alors seulement, agissez.
Ce dont vous aurez besoin pour le montage :
- seaux en plastique - 2 pièces;
- Tournevis cruciforme n°4 ;
- ruban adhésif ou ruban adhésif.
Préparation au montage
Assembler une cuisine IKEA de vos propres mains commence par le déballage des cartons de pièces. Il y en a beaucoup et il est facile de se tromper. Et cela ne sert à rien de tout révéler. Cela entraînera un encombrement du lieu. Il vaut mieux faire ceci : numéroter toutes les cases. Dessinez ensuite un plan approximatif de la cuisine. Les instructions de montage en usine incluent parfois un schéma similaire. Vous devez regarder attentivement s’il est inclus dans le kit. Vous devez absolument faire un schéma de la disposition des armoires.
La zone de rassemblement doit être confortable et spacieuse. Il est préférable de retirer tous les objets inutiles de la pièce pour ne pas trébucher dessus. Si la cuisine est petite, vous pouvez déplacer les meubles dans une pièce plus grande. Ici, il est important de prendre en compte la taille de la porte. Les éléments du casque finis doivent s’y glisser facilement. Dans le cas contraire, il sera impossible de rentrer les meubles assemblés.
Des seaux en plastique seront nécessaires pour stocker les petites pièces et les outils. Les seaux doivent être placés à proximité. Les forfaits de meubles comprennent généralement des outils simples et des pièces de rechange nécessaires à l'auto-assemblage.
Processus d'assemblage étape par étape
- Tout d'abord, les sections sont assemblées. Si vous sélectionnez à l'avance les pièces des sections, vous pouvez gagner du temps de travail. Par conséquent, il est préférable de passer quelques minutes et de mettre les éléments en tas séparés. De cette façon, le travail avancera plus rapidement.
- La deuxième étape consistera à retirer les portes des armoires et à retirer les étagères et les tiroirs. Rassemblez ces éléments.
- Vient ensuite l'installation des armoires. En vérifiant les instructions, les tailles et les types d'armoires sont déterminés. En conséquence, toutes les pièces des boîtes sont sélectionnées. Ensuite, vous devez installer correctement les vis, les chevilles et les serrures. Cela se fait avec un tournevis cruciforme. Il est important de fixer fermement la structure. Toutes les sections du casque sont assemblées de la même manière.
- De petits morceaux sont découpés dans le ruban adhésif et collés sur les zones visibles des sections finies. Ne retirez pas les bandes avant la fin du processus d'installation.
- L'installation et le placement des armoires sont effectués en stricte conformité avec les instructions. Toutes les sections doivent être placées à leur place, comme dans le schéma dessiné au préalable.
- Les portes doivent être suspendues uniformément et soigneusement. Tout d'abord, les auvents sont fixés séparément à la base et à la porte. Les points de fixation sont marqués au préalable sur les éléments. Même un petit décalage peut endommager la pièce. Vous devrez démonter les auvents et les déplacer ailleurs. Dans ce cas, des trous subsisteront et l’aspect ne sera pas esthétique. Si tout se passe bien, la porte « s'asseoira » exactement.
Vous devez vérifier sa solidité et éviter tout contact avec la base du meuble. Sinon, la façade s'effondre rapidement et devient inutilisable.
Si des rails sont fournis pour les armoires coulissantes, ils sont insérés dans des trous spéciaux.
Pose de meubles
Une fois tous les éléments du casque assemblés, ils doivent être placés à leur place. Tout d’abord, les tables sont dressées. Il est préférable de les recouvrir de plans de travail après les avoir mis en place. Dans de nombreux modèles d'ensembles, les plateaux reposent librement sur la base et ne sont attachés à rien. Par conséquent, il est plus pratique de les appliquer au stade final.
Les tables doivent être de niveau. Ceci est vérifié par le niveau. S'il y a des distorsions, les jambes sont ajustées et ajustées à l'idéal.
Armoires suspendues
Après avoir installé les armoires au sol, les parties murales de la structure doivent être suspendues. La première étape consiste à marquer l'emplacement de montage des profilés. Ce sont des bandes spéciales pour la fixation d'armoires murales. Les artisans mesurent généralement 140 cm du sol jusqu'au bord inférieur du meuble. Vous pouvez également mesurer à partir de la surface des tables.
Des trous sont percés dans les parois arrière des armoires. Des auvents y sont enfilés. Qui sont vissés aux murs. Les armoires sont accrochées sur des bandes de fixation à l'aide de ces auvents. Certains artisans fixent également les murs des armoires adjacentes pour plus de solidité. Mais si un démontage s’avère nécessaire, il sera difficile de les séparer.
Étapes finales
Lorsque l'ensemble est monté et installé, des éléments décoratifs y sont fixés. Poignées de porte, verre, etc. Les tiroirs sont insérés.
Vérifiez la solidité de la structure. Fixez le socle décoratif près du plateau de table.
L'assemblage de la cuisine IKEA Method s'effectue de la même manière. La différence entre les anciens modèles IKEA et les nouveaux produits ne réside que dans l'apparence et dans quelques petits détails.
Eh bien, j'arrive enfin à mon sujet préféré : les meubles de cuisine ! L'examen s'est avéré long car je voulais parler de mes quatre années d'expérience avec les cuisines IKEA. Rien ne renforce plus une famille qu'une rénovation réussie et, surtout, paisible)))) Eh bien, il n'y a pas eu de différends concernant la cuisine)))
Au cours des 4 dernières années, ma famille et moi avons subi deux rénovations et déménagements. Au début, nous pensions que lorsque nous emménagerions, nous resterions longtemps dans l'appartement, mais trois ans plus tard, l'attrait de rénover et d'acheter une cuisine s'est répété dans la nouvelle maison. Et sans l'expérience des réparations précédentes, cela aurait été difficile, car le temps presse. C’est tellement bon que je savais déjà exactement où aller en cuisine ! Où j'obtiendrai exactement ce dont j'ai besoin, sans délai, sans retard ni retouche ! Et mon mari était tout à fait d'accord : pas besoin de commander la cuisine, il est venu, a fait le calcul, l'a payée et l'a achetée ! C'est tout simplement incroyable de voir à quel point la production est rationalisée dans les usines IKEA : à tout moment, vous pouvez acheter et remplacer un élément de ferrure et être sûr qu'il coïncidera millimètre par millimètre avec ce dont vous avez besoin, que la couleur ne différera pas de 1/10 000 et, la plupart surtout, vous n'avez pas à attendre.
Honnêtement, je ne comprends sincèrement pas pourquoi attendre deux ou trois mois pour réaliser une cuisine sur mesure semblable à celle d’Ikeev. Les principaux arguments contre les cuisines IKEA que j'ai rencontrés :
1. "IKEA n'a pas de cuisine incrustée d'or, de strass ou de plumes." Tout cela est oui. Mais avec des « envies » standards, comme un dessus blanc/un dessous noir, un dessus de table épais, un « rouge brillant », etc., IKEA a déjà pensé à tout et pourvu à tout. D’ailleurs, si l’on en a vraiment envie, on peut toujours « tout finir à la lime » (coller des strass, réaliser des vitraux par exemple) ;
2. « Qualité du matériau ». Sur la base de mon expérience dans l'utilisation des façades de cuisine en MDF d'IKEA, je peux dire avec confiance : elles sont durables, la peinture ne s'est pas écaillée et elles peuvent être lavées/nettoyées. À propos, leur gamme comprend également des façades en placage de chêne naturel, qui sont tout simplement superbes. En général, le catalogue de cuisines IKEA Method comprend plus de 20 options de façade ainsi que des variations de couleurs dans certains types ;
3. L’argument « une cuisine sur mesure peut être réalisée à vos propres dimensions » n’est pas un argument. La nouvelle série IKEA Method propose une large gamme d'armoires, d'une largeur multiple de 20 cm (c'est-à-dire 20, 40, 60 et 80 cm.) Pas assez ? Oui, vous pouvez organiser une telle diversité comme vous le souhaitez ;
4. « Les appareils/comptoirs d’autres fabricants ne conviennent pas. » Approprié Continuez à lire.
Comme je l'ai déjà dit plus haut, je connais les cuisines IKEA depuis 4 ans. Ma première « cuisine de mes rêves » était la série Faktum Lidingo (la série a été arrêtée en 2014) - blanc laiteux, avec de hautes armoires murales en verre de 92 cm et un plan de travail noir. Lors du déménagement dans une nouvelle maison, ce fut une tragédie pour moi de me séparer d'elle. Mon mari a donc reçu un ultimatum : soit la nouvelle maison aura la même (en trois ans, elle n'a pas échoué une seule fois, elle n'a fait que me rendre heureuse), soit je refuse de déménager. Il a accepté, mais une fois la rénovation terminée, un gros problème est apparu : le long du mur le long duquel les meubles devaient être installés, il y avait une bordure en béton de 18 cm de haut et 19 cm de large, ce qui empêchait de placer la rangée inférieure de meubles. les armoires sont proches du mur, et comme, il fallait faire la cuisine sur commande. Et c'est là que l'expérience des années passées s'est avérée utile (voir argument n°3 sur le plan de travail). Chez IKEA, la largeur du plateau est de 62 cm, contre, par exemple, un plateau de Leroy dont la largeur n'est que de 60 cm. Il semblerait que cela ne convienne pas. Mais non ! Convient! Un artisan qualifié l'a parfaitement installé dans notre appartement, sans oublier le chevauchement devant. Et l'espace de deux centimètres par rapport au mur a été parfaitement comblé par un socle assorti au plateau de table. Je suis sûr que tout cela peut être fait avec la Méthode. Les comptoirs Ikea sont parfois un peu courts, mais vous en voulez un solide, non ? . Voici à quoi cela ressemblait :
comptoir « étranger » installé
Par conséquent, avec la nouvelle cuisine, la décision selon laquelle le plan de travail ne serait pas « original » ne nous a pas dérangés, car il n'y avait pas d'autres options. En conséquence, nous avons acheté un plan de travail solide prêt à l'emploi de 80 cm de large pour notre nouvelle cuisine, et tout va bien.
Parlons maintenant de la technologie. Ayant succombé à la panique des hausses de prix fin 2014 (vous vous souvenez quand le dollar a bondi ?), sachant que nous allions déménager cette année, nous avons acheté à l'avance un lave-vaisselle encastrable Bosh, « aux anciens prix », et il attendait dans les coulisses. Alors j'ai attendu. Lors de la décoration d'une cuisine chez IKEA, on nous avait prévenu qu'il y avait une forte probabilité (« près de 90 %) » qu'elle ne rentre pas dans la Méthode et que la porte ne se ferme pas. Mais nous avons décidé d'essayer. Alors qu'en pensez-vous ? Oui, avec difficulté, mais nous avons réussi à l'installer dans Method. Certes, il y a une nuance : regardez, un espace de 8 cm s'est formé entre le plateau et le couvercle PMM, c'est-à-dire qu'il est monté plus bas que nécessaire. Mais elle s'est levée. Mon mari n’arrive toujours pas à y faire une étagère pour mes poêles, je dois le lui rappeler.
Et bien maintenant directement à propos de ma nouvelle cuisine. Mon amour pour les façades Lidingo est resté le même, et dans la série Method, il y avait presque les mêmes façades sous le nouveau nom « Budbin » dans des couleurs laiteuses et grises. Mon mari a décidé de « changer quelque chose » et a insisté sur les façades grises et je ne me suis pas opposé.
Sur le site IKEA, vous pouvez planifier vous-même votre cuisine et ne pas faire la queue pour consulter un consultant. Juste au moment où nous sommes venus l'acheter, il y a eu une agitation terrible (c'était en avril-mai 2015, juste au moment où nous arrivions au début de cette nouvelle série). Les gens ont fait la queue pendant un jour ou deux. J'ai maîtrisé le site moi-même et je suis venu chez les consultants préparé. On m'a donné une place devant l'ordinateur et là, je travaillais déjà en 30 minutes. Ensuite, avec un consultant, nous avons supprimé tout ce qui était inutile et TOUT. La cuisine pourrait être payée et emportée. À quelle vitesse !
À propos des fonctionnalités de la série Method
La gamme de façades s'est élargie. Mon Budbin a été « testé » sur Faktum, la qualité est excellente.
Les raccords autrichiens Blum, disponibles pour Faktum, ont été remplacés par un autre, plus cher (Maximera) et moins cher (Forvara). Après avoir économisé sur de petites choses, comme l'éclairage intérieur, j'ai décidé de prendre Maximera. Ayant utilisé la cuisine depuis plus d'un an maintenant, je peux affirmer avec certitude qu'elle fonctionne parfaitement. Rien ne bouge, rien ne grince.
La largeur des armoires est devenue un multiple de 20 cm. Voici un petit moins. Le tiroir coulissant de 20 cm est étroit. Il y a peu de choses qu'on peut y placer ; 30 cm c'était mieux.
Aujourd'hui, je souhaite parler des principales différences entre le nouveau système et les cuisines FAKTUM que nous connaissons et qui sont vendues depuis plus de 20 ans.
1. Les armoires mesureront désormais 20/40/60/80/100 cm de largeur et 60/80/100/140/200/220 cm de hauteur. Les boîtes peuvent être accrochées horizontalement ou verticalement. IKEA promet plus de 16 000 combinaisons possibles.
2. Les armoires peuvent maintenant être fixées au mur à l'aide d'une bande d'acier. Cette méthode de fixation devrait faciliter la mise à niveau des armoires supérieures.
3. La hauteur du socle standard a été réduite de moitié : de 16 à 8 cm afin de gagner un espace précieux dans la cuisine. Grâce à cette étape, il a été possible d'augmenter la hauteur du meuble bas de 10 cm (jusqu'à 80 cm). À propos, la base sera désormais en plastique, cela résoudra le problème de la protection contre l'humidité.
4. Des cadres noirs sont apparus. Je sais que beaucoup attendaient cela.
5. Il sera possible d'installer de 1 à 8 tiroirs coulissants dans les armoires de plancher. Cela est devenu possible grâce à l’apparition de façades très étroites, hautes seulement de 10 cm.
6. Certains propriétaires de cuisines FAKTUM ont eu un problème avec la paroi arrière du meuble qui était expulsée par son contenu. Maintenant, ce mur sera inséré dans les rainures à l'intérieur du cadre, puis fixé avec des clous. Il continuera à être fabriqué à partir de panneaux durs.
7. Une autre innovation est l'éclairage LED intégré, qui s'allume lorsque vous ouvrez un tiroir ou une porte d'armoire.
8. Les changements ont également affecté les équipements. Désormais, pour régler la hauteur de la porte de l'armoire, vous n'avez plus besoin de desserrer les vis de fixation ; le réglage est disponible dans le mécanisme de fixation des charnières lui-même. Ceux qui ont eu du mal à aligner les portes en hauteur l’apprécieront.
9. Enfin, une armoire spéciale avec une grille de ventilation en métal est apparue pour le four.
Après le retrait de FAKTUM de la gamme, ses composants continueront à être produits pendant deux ans. La manière dont la garantie de 25 ans sera mise en œuvre n'est pas encore très claire. Donc, si vous envisagez d’acheter une cuisine maintenant, vous voudrez peut-être attendre que METHOD apparaisse.
Lors de la rédaction de cet article, des éléments du site ikeaddict.com ont été utilisés.