Costume d'homme de fer en papier diagramme. Comment faire un casque Iron Man : instructions pas à pas
Tous les enfants aiment se transformer en héros de conte de fées... Ils jouent déjà leurs premiers rôles d'acteur dans Jardin d'enfants... Bien sûr, le rêve de chaque fille est de devenir une merveilleuse princesse, et le rêve d'un garçon est de devenir un brave chevalier. Mais s'il suffit d'acheter une belle et longue robe, alors pour "équiper" un guerrier au combat, vous aurez besoin d'un costume et d'accessoires spéciaux. Le premier et, peut-être, le principal attribut de tous les uniformes chevaleresques est une coiffe. Alors, vous voulez faire du garçon un costume de carnaval original pour façon moderne? Alors découvrez l'une des nombreuses façons de fabriquer un casque. homme de fer... L'instruction est donnée sous la forme guide étape par étape avec commentaires.
Quoi et comment faire un casque iron man : préparation
Avant de commencer le travail, vous devez décider de quelques points:
- dans quel but il est prévu de faire une coiffe;
- à quoi ressemblera le futur produit ;
- quelles seront ses caractéristiques technologiques et fonctionnelles.
Si vous envisagez de faire une partie du costume, par exemple, le Fête du Nouvel An, ne compliquez pas trop le travail. Il est logique de simplifier autant que possible la fonctionnalité du casque et sa technologie de fabrication. Dans le cas de la conception de cet élément principal d'un costume de super-héros (photo 1), une approche complètement différente est nécessaire pour participer, par exemple, à une exposition d'œuvres de lycéens. Ici, à la fois l'apparence et sa capacité de fabrication seront d'une importance particulière. Cette instruction: "Comment fabriquer un casque d'homme de fer" est présenté sous la forme d'une description des étapes initiales. Planifiez d'autres travaux en fonction du résultat souhaité, en utilisant diverses matières premières et technologies.
Matériel nécessaire
Utilisez un papier paysage assez épais ou du papier Whatman pour réaliser le motif. crayon simple... Pour couper, vous aurez besoin couteau de papeterie, ciseaux ordinaires et petits, tels que manucure (pour une décoration soignée des coins et des recoins). Pour une version simplifiée du casque, utilisez du carton ondulé (une boîte de magasin pour l'épicerie, les cosmétiques, etc.). Reliez toutes les pièces avec de la colle forte et à séchage rapide (type "Moment") manuellement ou à l'aide d'un pistolet spécial. Pour la conception extérieure (pièces de revêtement et leur fixation), vous aurez besoin de ruban adhésif de différentes couleurs. L'alésoir du casque de l'homme de fer peut également être fabriqué à partir d'un matériau moins dense. Cette option est utilisée si vous envisagez de plâtrer des pièces et leur connexion ultérieure les unes aux autres, par exemple avec des aimants.
Assemblage du gabarit
La photo 2 montre les dessins du casque de l'homme de fer. Des parties du motif seront situées sur pièces suivantes têtes :
- Oreille.
- Pariétal.
- Arrière.
- Menton-buccal.
- Nasale.
- Frontale.
Connaissant cette condition, les pièces découpées dans du papier seront faciles à assembler en un seul produit. La photo 1 du casque fini aidera à distinguer les détails, car presque toutes les zones sont colorées différemment et ont des limites de connexion claires les unes avec les autres. Mais encore, avant de joindre le produit en un seul tout, disposez les pièces sur un large espace et délimitez les endroits pour le collage.
Nous fabriquons un casque Iron Man en papier ou en carton
Pour que cette coiffe s'avère volumineuse, vous devez disposer habilement les joints de connexion. Pour ce faire, surtout dans les zones de lignes courbes, faites de petites coupes qui aideront à leur donner une forme convexe lors du collage. La photo 3 montre clairement cette étape du travail. Après avoir assemblé toutes les pièces, collez-les Couleurs différentes... Peut également être utilisé pour la décoration papier coloré, qui doit ensuite être recouvert de ruban adhésif transparent. Donnez à votre enfant la possibilité de fantasmer en créant une création créative sur un thème contemporain.
Application de technologies complexes
La photo 4 montre comment fabriquer un casque d'homme de fer à partir de papier épais (papier whatman). Si vous couvrez le produit assemblé d'en haut fine couche mélange de gypse et laissez sécher, vous pouvez obtenir des blancs pour un modèle plus avancé sur le plan technologique. Dans ce cas, au cours du travail, vous devez réfléchir à la manière dont toutes les pièces amovibles ou coulissantes seront connectées les unes aux autres. Le plus simple et option appropriée avec cette technologie - l'utilisation d'aimants fixés à l'intérieur. Il est également possible d'installer des charnières rotatives dans la zone des joues et du menton pour rendre les parties avant mobiles. Extérieurement, un casque aussi moderne peut s'avérer particulièrement attrayant en raison de l'utilisation d'une émulsion lumineuse spéciale lors de la peinture. bien et la dernière étape les travaux consisteront à installer à l'intérieur de l'artisanat dans la zone frontale de mini-ampoules pour éclairer les cavités oculaires. C'est tout, le casque est prêt !
Cette artisanat original peut servir de base à la création de coiffes similaires pour d'autres héros de contes de fées. Créez, incarnant les fantasmes les plus insolites dans la réalité !
Après la projection du film "Iron Man" sur les écrans des cinémas, le monde entier a explosé à l'idée de recréer une copie exacte de son costume. Chaque fan de ce héros rêvait également de le porter au moins une fois et de sauver le monde des ennemis de l'humanité. Beaucoup de gens se sont posé la question : comment le faire sans dépenser beaucoup d'argent ?
Les fans du film ne sont pas seulement des garçons, mais aussi des hommes adultes qui n'hésitent pas non plus à afficher une telle tenue sur Fête d'entreprise du nouvel an... Il y a des faits où des gens assez riches ont dépensé non seulement du temps, mais aussi de l'argent pour recréer l'image d'Iron Man, et certains ont même tout à fait réussi.
Premiers gagnants
Le premier costume de renommée mondiale a été assemblé à partir de plastique et de fibre de verre. En Amérique, il était fabriqué à partir de plaques de polyuréthane et d'argile sculptée. Il est entendu que la tenue était inachevée sans un grand nombre une variété de rivets, LED, servomoteurs et autres pièces de rechange nécessaires. De nombreux artisans s'interrogent encore sur les inventions de l'auteur de ce costume. Dans cet article, vous apprendrez à fabriquer un masque à partir de papier Iron Man et également à partir d'autres matériaux.
En technique papier mâché
Tout costume du Nouvel An a un masque, c'est elle qui complète l'image et cache le visage. La technique du papier mâché prend du temps, mais le résultat en vaut la peine. Un masque pour un enfant de moins de 10 ans peut être réalisé sous la forme d'un bidon de trois litres. Nous prenons des journaux et commençons à coller le pot avec des morceaux trempés dans de la colle PVA. Une petite distance doit rester libre, de sorte qu'il soit plus tard facile de retirer la forme du masque de la boîte sans la couper. Lorsque tout est sec, retirez le produit et essayez-le pour comprendre si la taille convient ou doit être modifiée, à ce stade tout est encore possible. Le lendemain, après séchage final, tracez le contour des yeux et découpez-les.
Maintenant, nous devons tracer les lignes principales. Pour ce faire, nous regardons l'échantillon et les esquissons simplement. L'étape suivante consiste à créer un relief, cela se fait en utilisant le même papier et la même colle. Laissez le produit sécher complètement et voyez ce qui s'est passé. Si vous êtes satisfait du résultat, vous pouvez commencer à peindre. Les peintures doivent être épaisses, il est préférable d'utiliser de la gouache. Une fois les couleurs de base complètement sèches, tracez des lignes avec un pinceau très fin. L'effet métal peut être obtenu avec de la peinture dorée. Maintenant que vous savez faire un masque en papier Iron Man d'une manière facile, vous pouvez commencer à maîtriser une option plus complexe.
Nous prenons du papier
Annuellement avant vacances du nouvel an tous les parents ont une question sur le costume des enfants. Si auparavant vous pouviez simplement acheter un masque de n'importe quel animal et attacher une queue de cheval, maintenant les enfants veulent être comme des super-héros. Par conséquent, les parents commencent à chercher le costume le plus intéressant. Il y a ceux parmi les mamans et les papas qui veulent le faire de leurs propres mains. Les informations suivantes leur sont spécifiquement destinées.
La première chose à faire est d'être patient et de préparer tout ce dont vous avez besoin. Ce n'est pas un problème de trouver des dessins aujourd'hui. Nous fournissons un schéma de fabrication d'un masque Iron Man en carton. Il ne reste plus qu'à essayer de le suivre.
Matériel et outils nécessaires
Pour fabriquer un masque Iron Man, vous aurez besoin de :
- papier d'une densité de 160 g/m 2 ou carton ;
- tapis de coupe;
- gros;
- vieux poinçon;
- règle;
- pince à épiler;
- Colle PVA pour la construction, époxy;
- fibre de verre;
- peinture acrylique;
- les ciseaux;
Comment faire un masque en papier Iron Man
Après avoir choisi le modèle, vous devez découper des parties du produit et commencer à les coller ensemble. Lorsque le masque est prêt, donnez-lui une certaine rigidité. Pour ce faire, nous allons recouvrir le produit d'un composant à deux composants.Pour rendre le masque plus crédible, vous devez coller les coutures sur les extrémités avec du ruban adhésif. Ce sont les pièces qui vont se séparer dans produit fini... N'oubliez pas que travailler avec de l'époxy nécessite de la prudence et le respect des instructions. Lorsque tout est complètement sec, vous pouvez commencer à travailler avec de la fibre de verre. Il est collé en petites rayures à l'intérieur du masque en plusieurs couches. L'étape suivante est de donner au produit une forme parfaitement lisse. Ceci est réalisé avec un apprêt et du papier de verre. Lorsque le masque Iron Man est fabriqué de vos propres mains, vous pouvez appliquer de la peinture et, après séchage, vernir.
Une autre variante
De nos jours, beaucoup de gens aiment le fait main. Beaucoup de gens fabriquent de leurs propres mains des choses incroyablement belles et exclusives. Pourquoi ne pas faire plaisir à votre enfant et lui faire un costume de son héros préféré ?! Ci-dessous, une autre option sera décrite sur la façon de fabriquer un masque Iron Man en papier. L'instruction est très simple et accessible à tous.
La première étape de la fabrication est une impression de motifs de masques. Nous découpons soigneusement les détails. Le processus est assez laborieux, même si la première fois cela peut sembler simple. Maintenant, nous connectons les parties qui seront plus tard immobiles. Le reste des pièces doit être connecté à l'aide d'ouvertures. Maintenant, nous rendons le masque plus dense, cela nous aidera.Il peut être appliqué à la fois sur la partie extérieure et sur la partie intérieure. Laissez le produit sécher complètement, puis recouvrez-le d'un apprêt pour masquer les imprécisions et les divers défauts. Maintenant, nous commençons à peindre - les couleurs dépendent du modèle choisi. L'essentiel est d'appliquer la peinture avec soin pour éviter les bavures sur d'autres parties du masque. Mieux utilisé pour cela ruban de masquage... À l'aide d'une bombe aérosol, appliquez une couche de peinture, laissez sécher et répétez la procédure. Si vous utilisez peinture acrylique, il vaut mieux peindre dessus air frais... Si, une fois que tout est sec, vous constatez des imperfections, elles peuvent être masquées avec un simple vernis à ongles de couleur assortie. Le produit est prêt - profitez de votre travail.
Vous savez maintenant comment fabriquer un masque en papier Iron Man. Allez-y et soyez sûr que tout ira bien. Un enfant ou vous-même aurez un déguisement lumineux et mémorable.
Tout le monde a probablement vu le film "Iron Man" et, bien sûr, tout le monde, au moins une fois, s'est imaginé à la place du personnage principal Tony Stark dans un costume d'homme de fer. Bien sûr, tout le monde ne peut pas faire un costume d'homme de fer comme dans un film. Cependant, vous voulez toujours être dans le rôle de "surhomme" même pour un enfant, même pour un adulte.
Alors un jeune chinois Wang Kang, souhaitant se sentir comme un « homme de fer », entreprend de créerpremière version costume Iron Man MK I... Il a tout consacré au travail du costume. temps libre... J'avais l'habitude de créer des matériaux qui peuvent être facilement achetés dans quincaillerie... Et, après plusieurs mois de travail acharné, il a réussi à recréer costume d'homme de fer... Le poids total de la combinaison est d'environ 50 kg, qui ne peut être porté que par une personne formée.
Selon Wang, faire un costume d'homme de fer N'a pas fait travail spécial... L'une des principales règles à respecter lors de la création de telles structures est préparation minutieuse croquis des pièces et plan d'action.
Pour créer un costume, V. Kang a utilisé du caoutchouc mousse poreux dense, qui est utilisé dans la construction, la colle, le fil, les ampoules pour l'éclairage, les piles ( voir également). Ordinaire Matériaux de construction, que W. Kang a utilisé pour créer le costume de l'homme de fer.
Matériaux pour créer un costume d'homme de fer
Les premiers détails et éléments du costume - tout commence par la tête.
Casque d'Iron Man
Casque d'Iron Man
Ensuite, les détails sont créés pour être portés sur le corps.
Éléments de casque et de torse d'Iron Man
Les détails sont assemblés et les principaux éléments du costume deviennent déjà visibles.
Ajustement des pièces individuelles du costume d'Iron Man
Sans essayer nulle part.
Le costume d'Iron Man est presque prêt
Restait à peindre en couleur métal et le tour est joué !
Costume Iron Man - PRÊT !
Tout est maintenant prêt. Vous pouvez vous enfiler et partir en balade ! Les gens l'apprécieront certainement.
On fait appel à l'imagination, on demande conseil aux adultes et on essaie de le répéter.
Le personnage de nombreuses séries animées, dessins animés et trois films merveilleux devient progressivement extrêmement populaire tant parmi les cosplayers que parmi les enfants. Quel enfant ne rêve pas d'une tenue aussi merveilleuse qui non seulement le rendra presque invulnérable, mais lui permettra également de voler ? Bien sûr, il est impossible d'assembler un vrai costume pour des raisons évidentes, mais l'imagination des enfants compense étonnamment bien tous les défauts si le costume de l'homme de fer devient le sien. Lisez la suite pour apprendre à l'assembler vous-même!
Assembler en plusieurs parties
Afin de faire de votre enfant un costume d'homme de fer qui ressemble le plus possible à un vrai, il suffit de faire preuve d'un peu d'imagination et d'y consacrer un peu de travail et de temps libre. Il est préférable d'utiliser de l'aluminium à cet effet. Il est léger, durable, se plie bien et vous n'avez pas besoin de beaucoup d'outils pour le traiter. Pour rendre le costume plus réaliste apparence il est recommandé d'en peindre certaines parties avec des pots de peinture jaune et rouge. Les fentes oculaires peuvent être réparées de l'intérieur avec des lunettes de soleil. En outre, vous aurez besoin de n'importe quel col roulé jaune avec un décolleté et des manches longues.
En général, il y a maintenant pas mal d'imitateurs professionnels essayant de copier ce super-héros. Les costumes d'Iron Man sont fabriqués par eux à partir d'une grande variété de matériaux. Ils peuvent être de n'importe quelle forme et couleur. De nombreuses photos de cosplay de Tony Stark et de son incroyable costume ont fait surface ! Ne soyez pas paresseux et donnez un rêve à votre enfant, car qui parmi nous dans l'enfance n'a pas rêvé d'être un super-héros et de réaliser de grands exploits?
Pour les parents, préparer les vacances auxquelles participe leur enfant passe nécessairement par la confection ou l'achat d'un costume de personnage, à l'image duquel le bébé apparaîtra. V Ces derniers temps divers super-héros ou personnes avec Pouvoirs surnaturels... L'un des personnages préférés des garçons est Iron Man - un robot multifonctionnel contrôlé par Tony Stark (son créateur), sauvant le monde du mal.
Les costumes d'Iron Man peuvent être très divers et avoir de nombreuses variantes, car, malheureusement, cela ne fonctionnera pas pour créer un véritable vêtement qui rend son propriétaire invulnérable et permet même de voler. Mais vous pouvez faire un costume de héros de vos propres mains à partir de matériaux simples... De quoi? Oui, il y a juste beaucoup de variantes : du papier, du carton, cousu à partir de tissu, fabriqué à partir d'aluminium ou d'un autre métal, moulé à partir de plastique, etc.
Les principaux composants du costume
Si vous adoptez le costume de ce personnage, vous constaterez qu'il en existe de nombreux modèles et variétés, alors choisissez l'option que vous aimez le plus. Le modèle le plus populaire et le plus spectaculaire est l'Iron Man Mark VII.
Le costume pour enfants doit être léger et sûr, vous ne devez donc pas y connecter d'électronique pour recréer des yeux brillants ou d'autres éléments de l'image du héros. Il est préférable de confectionner un costume pour l'enfant en utilisant la technique du papercraft. Il vous permettra de créer une image en utilisant du papier, du carton et du collage à l'aide de technologies spéciales.
Pour fabriquer un produit, vous avez besoin de schémas ou de dessins. Il y en a déjà pas mal. En installant Pepakura Designer 3 ou Pepakura Viewer, vous pouvez décompresser les fichiers * .pdo. Ensuite, ils peuvent être édités, définir leurs tailles, etc. Les schémas peuvent être redessinés ou imprimés à l'aide d'une imprimante. Ensuite, collectionnez et peignez. De cette façon, vous obtiendrez un costume presque réel de vos propres mains.
- Lien vers le programme Visionneuse de Pepakura: http://www.tamasoft.co.jp/pepakura-en/download/viewer/index.html
- Motifs d'Iron Man peut être téléchargé ici : http://pepakura.ru/razvertki/bronya/kostyum-zheleznogo-cheloveka.html
Processus de fabrication : que faut-il préparer et comment assembler les pièces ?
Après avoir imprimé les dessins, prenez les mesures de votre enfant et apportez les modifications nécessaires aux schémas - vous aurez ainsi le vôtre option enfants combinaison. Puis imprimez à nouveau, mais avec les bonnes dimensions.
Le papier pour faire un costume doit être pris avec une densité d'au moins 160 g / m2. Les cosplayers expérimentés conseillent de prendre même pas du carton, mais un papier Whatman très dense. Vous aurez également besoin de :
- un bon cutter ou un couteau utilitaire bien aiguisé ;
- tapis de coupe spécial;
- fibre de verre;
- poinçon;
- colle et pistolet à colle;
- les ciseaux;
- résine époxy (des gants en caoutchouc et un respirateur sont également nécessaires pour travailler avec des résines);
- peintures acryliques (rouge et or);
- plastique transparent;
- papier de verre.
Alors, commencez à faire votre propre costume.
- Le casque est fait en premier. Pour ce faire, imprimez les dessins du casque et découpez tous les détails. Ensuite, commencez soigneusement à les coller ensemble (assemblez comme un casque ordinaire). Tous les éléments sont numérotés, il faut donc les coller très soigneusement (le dos du masque, qui sera retiré, n'a pas besoin d'être collé).
- Après avoir terminé la fabrication du casque, vous devrez le recouvrir d'une colle spéciale à deux composants (époxy - résine plus durcisseur). Fixez tous les éléments du casque avec verso par l'habituel clips de papeterie et recouvrez-le de colle. Assurez-vous d'utiliser les bonnes proportions pour vous assurer que le produit sèche plus tard et est utilisable. Certaines personnes utilisent de la résine polyester au lieu de l'époxy, mais elle a une odeur très piquante et toxique et prend beaucoup de temps à sécher.
- Renforcez ensuite l'intérieur du casque avec de la fibre de verre (découpez le matériau en petites bandes et collez-le en plusieurs couches à l'intérieur du produit) et recouvrez-le à nouveau de colle époxy des deux côtés. Lorsque tout est sec, poncez le casque pour qu'il devienne comme un plâtre.
- Ensuite, le produit doit être peint. Puisque vous devez utiliser deux couleurs, vous devrez couvrir avec du ruban adhésif les endroits où il est censé être peint avec une couleur différente (peinture rouge, laissez les zones où il devrait être doré et vice versa).
- Séparément, vous devrez faire le dos (tout de même - recouvrir de colle, fixer avec de la fibre de verre, du sable, de la peinture). Les oreilles sur papier sont juste rondes, mais vous pouvez les fabriquer en bois et les coller ensuite sur votre casque. Pour retirer et mettre le casque, vous pouvez utiliser des aimants ou un simple mécanisme manuel (une option avec velcro est également possible).
- Collectionnez le cou, la poitrine, le dos, les épaules, les bras, les jambes et d'autres parties du corps d'Iron Man de la même manière. Essayez des raccords réguliers pour vous assurer que les mesures sont en ordre. Lorsque vous peignez, assurez-vous qu'aucun espace ou espace n'apparaît.
- En faisant Assemblée générale détails, leur donner de la mobilité. Un pistolet à colle est très utile pour cela, et vous aurez également besoin d'élastiques (principalement larges et étroits pour les mains) et de mousquetons en plastique pour les grandes pièces.
- S'il y a un désir et une opportunité, vous pouvez créer des éléments lumineux. Pour faire briller la poitrine d'Iron Man, collez-y une veilleuse à LED alimentée par batterie et vous pouvez utiliser une lampe de poche pour vos mains (il suffit de scier la partie inutile pour qu'elle puisse facilement s'insérer). Si dans le côté l'index positionnez le bouton de la souris, puis le porteur de la combinaison peut facilement allumer la lueur quand il le souhaite.
- Les yeux sont fabriqués sur la base de lumières LED. Vous aurez également besoin d'un interrupteur, de piles et de fils. Coupez deux morceaux de la forme des yeux plastique transparent et réglez les lumières juste en dessous des trous pour les yeux.
Classe de maître vidéo
Masque d'Iron Man, travail pas à pas... Modèles ici : http://goo.gl/pJFr6C
Un peu option plus facile- il s'agit de créer un masque en papier mâché selon le même principe, et le costume lui-même est découpé et cousu dans du tissu (col roulé / veste et pantalon jaune ou doré, et le reste des détails est rouge : gilet, culotte, gants , mi-bas, chaussures). Le soulagement de certaines parties du corps peut être donné à l'aide de caoutchouc mousse.
Si votre enfant rêve d'être un vrai super-héros, aidez-le à réaliser son rêve et créez un miracle pour lui sous la forme d'un costume de son personnage préféré. Ou faites-vous un costume cool :)
Réacteur d'Iron Man